ASk Company Logo      Acquisition Solutions k

Data Acquisition Hardware
About Us News Products Events

 

 

Hardware

Our boards are used with our drivers to quickly design DACQ and instrument control for scientific equipments. Our combination of drivers and boards will have your application up and running with a minimum of effort in the minimum amount of time. We have experience with the following hardware platforms : 8051, 6800, TI DSPs, PIC controllers. If you do not find what you need, Please contact us, and let us know about your requirements.
 

Embedded DSP:
ModCtrl
DSP2


DSP :
DSP2Bag - TMS320C203
SHRDSP - TMS320C25

Microcontroller :
USBCore - USB controller.
PICtrl - PIC controller + digital IO.


IO :
SHRDIO - ADC & DAC & digital IO.
HPMeter - Electrometer assembly.
TController - TC Vacuum gauge controller assembly.
 

Embedded DSP


ModCtrl
DSP : TMS320C203 - 40 / 56 / 80 MHz
Memory size : SRAM 128 K + Flash 128 K + Flash Drive
PC Link : IEEE 488 and RS232 and Fast Synchro Serial Bus (ASKLink)
Analog IO : ADC & DAC 16 bits - 100 KHz -
Digital IO : 8 Bit configured either as Input or Output + 1 Input
Driver : Win32

This DSP controller is 8.5" by 6". ModCtrl is an 'acquisition computer' by itself. The board carries its own Hard-drive to sustain long and fast acquisition periods. ModCtrl comes already with its own high resolution ADC (+ Electrometer with programmable gain ) & DAC. Control of additional functions can be done using 1 of the 2 parallel 16 bits ports available. The ASKLink, a Fast serial bus (SPI with 32 Address available) + I2C can be used to easily control 'distant' modules function within your instrument. Software development is done through a serial link compatible with TI development tools.

Embedded DSP


   DSP2


DSP : TMS320C203 - 40 MHz
Memory size : SRAM 128 K + Flash 128 K + IDE Hard-drive
PC Link : IEEE 488 and RS232
Driver : Win32

The unit is controlled via a GPIB interface. The driver is a 32 bits Windows compatible program. This board has mainly been designed as a plug-in replacement board of the Smart-card for the HP mass spectrometers. However, the board and technology may be used for other applications. The board carries its own Hard-drive to sustain long and fast acquisition speed. Software development is done through a serial link compatible with TI development tools.

 

DSP Processor


See Hardware   DSP2BAG


TI 320C203 - 40 MHz
PC Link : RS232

This DSP controller core is 3.1" by 2.5". It is small, yet powerful. The DSP is a 16 bit processor from TI clocked at 40 MHz. The board comes with 64 KWords of RAM, 128 KByte of FLASH, one RS232 link, one fast 16 bits bus. Software development is done through the serial link compatible with TI development tools. This low cost controller board may be used in many instrument controller applications.

 

DSP Processor


   SHRDSP


TI 320C25 - 40 MHz
Memory : 128 K Shared access with PC
PC Link : Plug into ISA slot
Driver : DOS
Development tools : TI

8051 Processor

USBCore
Cypress 2131 - 12 MHz
Memory : 32 K SRAM / 64 K EEProm
IO : 2x 8 Bit ADC / 2x 24 Bit ADC / 8 Bit DAC / 2x Digital out
PC Link : USB
Driver : Windows
Development tools : Cypress

The USBCore contains an advanced 8051 with a USB interface engine. The microcontroller has 8k bytes of RAM internally, and is supplemented with 32k bytes of external memory. The board comes with 2x 8 Bit ADC / 2x 24 Bit ADC / 8 Bit DAC / 2x Digital outputs. The size of the board is 5" x 4" including an array of 2.5" x 1.5" available for development. The board can drain its power from either the USB bus or from an external power supply.

 

PIC Processor

PICtrl
Microchip 16F872 - 4 MHz
Memory : 2k Flash / 128 Ram / 64 EEProm
IO : RTC / 2x Power relays / 2x inputs ( 1 opto isolated) / 16x1 LCD / 4x Key-Switch (< > Return Esc)
Board size : 4.5" x 4.5" ( Nema)
PC Link : Microchip development connection
Development tools : Microchip

 

IO Board


     SHRDIO

Fast Analog interface, 16 Bit ADC & DAC able to perform one measure per 10 Us
Theoretical dynamic 65 Millions ( Gain 1, 10, 100, 1000)
The DACs & ADC are protected against surge
Reduced noise via multi-layer board
8 programmable relays
2 isolated digital inputs
The digital input & output are isolated

This board can be used with SHRDSP controller to provide the analog interface of your instrument.

 


 

Pricing

Description SKU # Price
ModCtrl   $ 3495
DSP2   $ 2950
DSP2BAG   $ 475
SHRDSP   $ 2100
USBCore   $ 675
PICtrl   $ 275
SHRDIO   From $ 920 to $ 1245 according to options
     

 

The basic development tools of most of our systems may be downloaded for free from the web-site of the chip manufacturer.
The given price is for one board and its driver (when applicable).
Prices and specifications are subject to changes, please check with us prior placing an order.
All of our products are designed and assembled in USA.
Standard warranty 90 days.

 



Home Request Form

Send mail to acqsol@flash.net with questions or comments about this web site.
Copyright © 2004 Acquisition Solutions k
Last modified: 01/24/09